lC 34 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock models available a series 4 & 5 tumbler 1-4 pole switchlocks features/benefits ? multi-pole and multi-position ? shorting and non-shorting contacts available ? low level and power capability ? pcb mounting typical applications ? security alarm systems ? medical equipment ? computer ser vers specifications contact rating: q contact material: switch-2.5 amps @ 125 v ac; 350 ma @ 125 v dc (ul/csa). carry-5 amps continuous. see page m-38 for additional ratings. electrical life: 15,000 make-and-br eak cycles at full load up to 300,000 detent operations. contact resistance: below 20 m typ. initial @ 2-4 v dc, 100 ma, for both silver and gold plated contacts. insulation resistance: 10 9 min. dielectric strength: 1,000 vrms min. @ sea level. operating temperature: C0?oto 85?. indexing: 30o 2-- positions, 45?or 90? o-3 -ositions. static resistance: anti-static models exceed 20 kv dc static resistance @ sea level, lock body to terminals. materials lock: zinc alloy with stainless steel facing. keys: two nickel plated brass keys with code number. switch housing: glass filled 6/6 nylon (ul 94v-0). movable contact: q contact material: coin silver, silver plated. see page l-38 for additional contact materials. stationary contacts & terminals: q contact material: brass, silver plated. see page l-38 for additional contact materials. mounting nut: zinc alloy. dress nut: brass, nickel plated. locking ring: 6/6 nylon (ul 94v-2). terminal seal: epoxy. note: any models supplied with q or b contact material ar e rohs compliant. note: specifications and materials listed above are for switchlocks with standard options. for information on specific and custom switchlocks, consult customer service center. build-a-switch t o or der , simply select desired option from each category and place in the appropriate box. available options are shown and described on pages lC5 thr ough lC8. for additional options not shown in catalog, consult customer service center. switch and lock function a21613 dp, 30 keypull pos. 1 a11413 sp, 90 keypull pos. 1 a31413 3p, 90o keypull pos. 1 a3141u 3p, 90 keypull pos. 1 & 2 a11513 sp, 45 keypull pos. 1 a31513 3p , 45 keypull pos. 1 a3151u 3p , 45 keypull pos. 1 & 3 a21582 dp, 45o keypull pos. 1 a11613 sp, 30 keypull p05. 1 a1161u sp, 30 keypull pos. 1 & 4 a12112 sp, 45 keypull p05. 1 a42112 4p , 45 , keypull pos. 1 seal none no seal e epoxy seal keying 2 two nickel plated brass keys t erminations z solder lug c pc thru-hole contact material q silver b gold lock t ype a 4 tumbler lock g 5 tumbler lock with anti-static switch y 4 t umbler lock with anti-sta tic switch lock finish 2 stainless steel facing 1 nickel plated with removable dress nut 8 gloss black facing shorting/non-shorting n non-shorting contacts s shorting contacts mounting/lock style n with nut r with removable dress nut
lC5 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock ax161x switch function shown = detent positions (30 o , 45 o or 90 o ) = key pull possible in these positions. = stop po sitions legend 3p model 4p model sp model (omit terminals b, c & d) dp model (omit terminals b & d) terminal numbers t erminal numbers molded on housing bottom. 4 pos. 1 2 3 4 pos. 1 2 3 2 pos. 1 2 pos. 1 pos. 1 2 3 pos. 1 2 3 pos. 1 2 3 pos. 1 2 *note: switchlock models a114xx, a115xx, a116xx and a12112 with terminations have additional terminal no. 8 as switch support only. this terminal is not connected electrically inside switch. all models with all options when ordered with ?ontact material. ax14 models not available with ?horting contacts. part number shown: a116132y2nznq a series 4 & 5 tumbler 1-4 pole switchlocks switch and lock function 45o po s itio n 1 a- 2 a- 2 , b-5, c-8, d-11 a- 1 a- 1 , b-4, c-7, d-10 a1 2 112 * a4 2 112 sp 4p po s itio n s 1 & 4 a- 4 a- 3 a- 2 a- 1 a1 1 61 u * sp po s itio n 1 a- 4 a- 4 , c-10 a- 3 a- 3 , c- 9 a- 2 a- 2 , c- 8 a- 1 a- 1 , c- 7 a1 1 61 3 * a2 1 61 3 sp dp po s itio n 1 a- 2 , c- 8 a- 5 , c- 1 1 a- 4 , c- 1 0 a2 1 58 2 dp po s itio n s 1 & 3 a- 4 , b-8, c-12 a- 2 , b-6, c-10 a- 1 , b-5, c-9 a3 1 51 u 3p po s itio n 1 a- 4 a- 4 , b-8, c-12 a- 2 a- 2 , b-6, c-10 a- 1 a- 1 , b-5, c-9 a1 1 51 3 * a3 1 51 3 sp 3p po s itio n s 1 & 2 a- 4 , b-8, c-12 a- 1 , b-5, c-9 a3 1 41 u 3p po s itio n 1 a- 4 a- 4 , b-8, c-12 a- 1 a- 1 , b-5, c-9 a1 1 41 3 * a3 1 41 3 sp 3p in d ex i ng lo c k co n fi g ura ti o n key pu l l pos i ti on s co n nected te r min al s pos. 1 pos. 2 pos. 3 pos . 4 model no . no . poles 90o 30o 45o
lC 36 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock a series 4 & 5 tumbler 1-4 pole switchlocks keying lock type lock finish shor ting/non-shor ting 1.635 (41,52) (4 tumbler) 1.733 (44,01) (5 tumbler) a126 .798 (20,26) .775 (19,68) n non-shor ting cont acts (br eak-befor e-make) s shor ting cont acts (make-befor e-br eak) 2 stainless steel 1 nickel 8 gloss black g 5 tumbler lock with anti-st atic switch y 4 tumbler lock with anti-static switch a 4 tumbler lock with remov able dress nut no yes 2 nickel pla ted brass keys 2 code no. on lock code no. on key keying options option code note: all or ders keyed alike, standard. for more than one key code, replacement keys, or other special featur es, consult customer service center. key part number: 115140126 not available with ax23 models. not available with ax14 models. note: for available option combinations, see page l-38. note: for available option combinations, see page m-38. ? y ? a ? g mounting styles n r lock types a v ailable option combina tions ? ? ? ? 8 ? ? ? 2 ? ? 1 mounting styles nr lock types gay finish options available option combinations note: key head shape subject to change without notice.
lC7 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock a series 4 & 5 tumbler 1-4 pole switchlocks terminations mounting/lock style panel mounting 1.036 (26,31) .270 (6,68) panel mounting 3p model 4p model pc mounting r remov able dress nut n with nut z solder lug c pc thru-hole typical inst alla tion install hex nut with enough clearance to allow for dress nut and panel. place switch through cutout in rear of panel. install and tighten dress nut by hand, then tighten hex nut. always tighten assembly with back of panel hex nut to avoid damaging front of panel. nut part number: 175050700 sp model (omit terminals b, c ,d) dp model (omit terminals b & d)
lC 38 dimensions are shown: inch (mm) specifications and dimensions subject to change www.ck-components.com l switchlock cont act material seal available hardware e epoxy seal none no seal switch and lock assembly instructions mounting information (all models) 1. place lock assembly in mounting hole on panel, secure with mounting nut. 2. align keying tab on switch assembly with keying slot on lock assembly. 3. snap assemblies together. 4. switch installation is permanent. switch cannot be removed from lock after assembly. attempting to separate switch and lock may cause damage to switchlock. 1 movable contact: copper alloy, with gold plate over nickel plate. st a tionary contacts & terminals: brass, with gold plate over nickel plate. 2 movable contact: coin silver, silver plated. stationary contacts & terminals: brass, silver plated (standard with all termination options). all models with all options when ordered with ?ontact material. key code: a126 4 tumbler part no. (one key) 115140126 material: brass finish: nickel plate key code: d001 5 tumbler part no. (one key) 115441001 material: brass finish: nickel plate .215 (5,46) max. .125 (3,18) max. r .195 (4,95) max. .105 (2,67) max. n panel thickness a & y lock types g lock types mounting styles ? ? r ? ? ? n lock types gay lock finishes 128 mounting styles a vailable option combinations a series 4 & 5 tumbler 1-4 pole switchlocks mounting/lock style * note: see technical data section of this catalog for rohs compliant and compatible definitions and specifications. co n t ac t an d option co d e te rmin al mater ial r a ti n g q sw it ch -2.5 a mps @ 125 v a c; 350 ma @ 125 v d c (ul/csa ) . low leve l/ d ry cir cu it b si l ver 2 po wer 0.4 va m ax . @ 2 0 v a c o r d c m a x. rohs co m pl ian t* rohs co m patib l e* ye s ye s ye s ye s g old 1 car r y- 5 a m ps co n ti n uo us.
|
